How do I setup TPLink VPN / Omada?

Pre-reqs:

• VPN server URL:
• VPN username:
• VPN password:
• VPN PSK:

Setup VPN:

1. Open Control Panel -> Network and Internet -> Network and Sharing Center.
2. Click "Set up a new connection or network."
3. Click "Connect to a workplace."
4. If you have an existing VPN, click Create a new connection, otherwise click "Use my Internet connection (VPN)."
5. Enter the Internet address from the VPN Server URL above.
6. Enter a Destination name (i.e. "Work").
7. Click Create.
8. Now click on Change Adapter Settings, right click on the new VPN connection, and choose Properties.
9. Click on Security tab.
10. Change Type of VPN to: L2TP.
11. Click Advanced Settings.
12. Change to Use preshared key. Enter the PSK from above.
13. Under Authentication, click Allow these protocols, and choose Microsoft CHAP.
14. Click Ok.
15. Now, click Windows button and type "VPN"
16. Go to VPN settings.
17. Click the drop down to the right of the VPN connection and choose Advanced Options.
18. Click Edit.
19. Copy the Pre-shared key from the PSK above.
20. Enter your VPN username and password.
21. Click Save.